This feature in the Cut Menu allows you to move the cut to a new location on the cut bed.
This feature was developed in response to users having to recreate files in WAM when they wanted to move the cut to a new location on the bed.
You will now notice a new item to the cut menu called “Move Origin”. When this feature is selected, you can move the nozzle to a new starting location by pressing the arrow keys.
Once the new location is set, the firmware checks the cut extents. If these are outside due to the shift you will get a prompt.
If the cut falls within the cut bed you can go to cut the material menu and start the cut.
Each press of the button moves the gantry by 10 mm
