Register WAM Account
This procedure will guide you through setting up your WAM account and how to avoid common problems
1. Before we begin, you will need your User Manual
Inside, you will need to locate your Software Serial Number
Only 3 WAM accounts can be tied to a single Software Serial Number. These accounts are known as a “Full/Registered Account”. For additional users, please create a “Public Account” - See Additional Information below
2. Navigate to the WAM section of the WAZER website and select “Register”
3. Enter your information and your Software Serial Number
Please note that when entering the Software Serial Number it is case sensitive.
Should you not choose to enter your Software serial number at this stage, you will be prompted to enter it before generating your first cut file
4. Make sure you click out of the text box before clicking “Submit Serial Number” or “Register”
5. You’re all set, see the Guide for using WAM and Machine Procedures for ways to get the most out of the WAZER software
Additional Information
One additional option you may want to set up at this point is the “Public Account”. A public account gives you the ability to grant an unlimited number of people who use your machine restricted access. This lets them generate cut files but not change any machine settings or material settings. The option can be found in the machine tab of the options menu.
If more than 3 Users need access to edit the WAM Machine or Material settings, please contact the Support Team.