Restart Cut

This feature lets you start the cut from any point within a cut file, thereby allowing a restart from the position the cut failed.

Feed Rate Override

You can increase or decrease the speed of a cut to compensate for changes during real-time cutting.

Read Cut File Parameters

This feature is part of the Cut Workflow screen and allows you to view the selected file cut parameters.

Move origin

This feature in the Cut Menu allows you to move the cut to a new location on the cut bed.

Cut time on cut screen

This cut feature shows the actual elapsed Cut Time for a given file.

Total Cut Time

This NEW option under the setup and maintenance menu shows the total cut time on the machine.

[WARNING] WAZER tracks the number of hours it has been running.
Please check the “Total Cut Time“ in the maintenance menu regularly. If you do not abide by the regular maintenance procedures and schedule, the warranty and support for your WAZER will be void.

Before servicing WAZER:

Turn off or close the On/Off Valve or water supply to the machine.
Purge the high-pressure system by properly ending/completing a cut or performing a Nozzle Purge.
Turn off WAZER and disconnect AC power from WAZER and the Pump Box.
Never remove the cover of the Pump Box while it is plugged in.